Thanks to Team Next Gen my phase is ready to rawk.
Rebuilt by Team Next Gen
Evap Head by @itor
Evap Head Enclosure by Ssilencer
Paint by Smooth Creations
Charged up with R507 and pulling the QX6700 @ 4GHz 1.625Vcore -33C Idle
Wondering if I should pop in a faster quad core? I am waiting on more 1/2" Tygon to get her back together.
This is the new resevoir I need to tap the hole in teh bottom. The inlet will be two small tubes that come in from the back, thru the heart and thru the stake which will pierce the heart. I will drill holes thru the stake for the tubes so the fluid look like it is spurting from where the stake pierces the heart. The heart will be in the upper chamber with the stake piercing the front to the chamber. The blood will spurt in the small that is between the top chamber and the front (the top of the L-shaped piece of plastic). The heart will stay dry (which is good because it is electrical and pumps.
Making more progress . . .getting the mobo ready to install . . .protecting against condensation. Tubing is just for layout purposes . . .will likely shorten the runs as muc has possible.
Probably will not use the top piece of neroprene as the evap head has some around it.