hi,
i finaly did it
here are some shots:
the specs:
Koolance EHX-1050BK x2
Koolance CPU-330
Koolance CHC-120 x2
Koolance VID-282 x2
Koolance PMP-400 x2
Swiftech Micro Reservoir x2
Fluid XP+ Ultra (Blood Red)
Tygon Tubes
i had to mod the top of my case to let the tubes in from there
i have 2 loops and they are:
1- CPU: pump->cpu->rad->res
2- NB SB 8800 ultras: pump->NB->1st ultra->SB->2nd ultra->rad->res
------------------------------------
i have a Question, i feel that my temps are allitle high for a only cpu loop and with that radiator, on stock its 35c idle and prime95 load for 1 minute it gets to 57c, and when overclocked to 3.41Mhz it idles at 41c-46c and prime 95 for 1 minute gets me to 83c-85c, does that seem right to you? or did i do something wrong?