Quote:
Originally Posted by xo4ox
after further investigations i am almost positive that there is no contact between the cpu and the block because when i feel the GPU blocks they are warm even when touching the tubes in the GPU loop its warm too, but when doing the same on the CPU it is cold and also the tubes, so what can i do to fix this? i already tightened the block to the limit and i don't think i can go more without damaging something
|
you can not damage the CPU or mobo from screwing down the block too much (unless you are the hulk or something), at most the system will not post and you can back the screws off a little more till the system posts.
i think anything over 50lb of pressure on the 680I CPU socket and the system will not post.