|
| Notices |
Welcome to the Team NexGen forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
| Hardware Discussion Talk about the newest of the new, the best of the best. etc... |
11-22-2007
|
|
First Sergeant
Level up: 38%, 41 Points needed |
|
|
Join Date: Apr 2007
Age: 41
Posts: 263
Rep Power: 2
|
|
|
Re: finaly finished my W/C
pm me your address. I will send you a Danger Den block to try out just to see if it is a block issue. If it is the block then we need to see about getting you a different Koolance block or you can send me the Koolance block and keep the Danger Den block in exchange.
|
11-24-2007
|
 |
Gunnery Sergeant
Level up: 36%, 146 Points needed |
|
|
Join Date: Dec 2006
Location: Kellogg
Age: 19
Posts: 227
Rep Power: 2
|
|
|
Re: finaly finished my W/C
Dont do it!!!!, aluminum rads. Check the koolance block for flatness too.
__________________
Zack Williams AKA Blue_fire
Team NexGen
The Rig: "NameLess"
Intel E4300
ASUS P5K Deluxe
2x1GB Corsair Dom
2x512Mb corsair XMS2
Visiontek Radeon HD 3850
Enermax Liberty 620W
Ultra Aluminus
OCZ Vendetta 2
|
11-24-2007
|
|
First Sergeant
Level up: 38%, 41 Points needed |
|
|
Join Date: Apr 2007
Age: 41
Posts: 263
Rep Power: 2
|
|
|
Re: finaly finished my W/C
Quote:
Originally Posted by blue_fire
Dont do it!!!!, aluminum rads. Check the koolance block for flatness too.
|
he can add stuff for corrosion . . . |
11-24-2007
|
|
Lance Corporal
Level up: 16%, 32 Points needed |
|
|
Join Date: Sep 2007
Location: Saudi Arabia
Posts: 45
Rep Power: 0
|
|
|
Re: finaly finished my W/C
i think fluid xp+ ultra doesn't allow corrosion, or im wrong? and i already checked and its flat, thats what making me go crazy
__________________
My Rig:
EVGA 680i T1 Revision With Koolance CHC-120 for NB & SB
Core2 Extreme QX6800 With Koolance CPU-330
EVGA 8800 Ultra in SLi With Koolance VID-282
Corsair Dominator PC-9136 C5D
2 WD Raptors 150GB in RAID 0
1 WD Caviar 500GB
2 Koolance EHX-1050BK Eternal Radiator
2 Koolance PMP-400 Pump
2 Swiftech Micro Reservoir
Ultra X3 1000watt PSU
3dmark06 score: 18085
Here is the link
|
11-25-2007
|
|
Gunnery Sergeant
Level up: 36%, 146 Points needed |
|
|
Join Date: Dec 2006
Location: Kellogg
Age: 19
Posts: 227
Rep Power: 2
|
|
|
Re: finaly finished my W/C
nothing will absolutely stop corrosion. it also says its non conductive....
__________________
Zack Williams AKA Blue_fire
Team NexGen
The Rig: "NameLess"
Intel E4300
ASUS P5K Deluxe
2x1GB Corsair Dom
2x512Mb corsair XMS2
Visiontek Radeon HD 3850
Enermax Liberty 620W
Ultra Aluminus
OCZ Vendetta 2
|
11-25-2007
|
|
Lance Corporal
Level up: 16%, 32 Points needed |
|
|
Join Date: Sep 2007
Location: Saudi Arabia
Posts: 45
Rep Power: 0
|
|
|
Re: finaly finished my W/C
Quote:
Originally Posted by blue_fire
nothing will absolutely stop corrosion. it also says its non conductive....
|
i don't know about the corrosion, but it is non conductive BELIEVE ME because if its not my rig would be in the garbage right now because when i first assembled the w/c setup one tube went loose and spilled everywhere while it was on and its still running after i cleaned everything
__________________
My Rig:
EVGA 680i T1 Revision With Koolance CHC-120 for NB & SB
Core2 Extreme QX6800 With Koolance CPU-330
EVGA 8800 Ultra in SLi With Koolance VID-282
Corsair Dominator PC-9136 C5D
2 WD Raptors 150GB in RAID 0
1 WD Caviar 500GB
2 Koolance EHX-1050BK Eternal Radiator
2 Koolance PMP-400 Pump
2 Swiftech Micro Reservoir
Ultra X3 1000watt PSU
3dmark06 score: 18085
Here is the link
Last edited by xo4ox; 11-25-2007 at 03:54 PM.
|
11-25-2007
|
|
Gunnery Sergeant
Level up: 29%, 46 Points needed |
|
|
Join Date: Sep 2007
Location: Salem Oregon
Posts: 213
Rep Power: 2
|
|
|
Re: finaly finished my W/C
lol its not 100 % non conductive there is a few things that fluid xp well burn up like powersupplies..
|
11-26-2007
|
|
Gunnery Sergeant
Level up: 36%, 146 Points needed |
|
|
Join Date: Dec 2006
Location: Kellogg
Age: 19
Posts: 227
Rep Power: 2
|
|
|
Re: finaly finished my W/C
we have spilled koolance fluid all over mobo's before and it has been fine. Fluid xp is in no way non conductive. just a little bit less than water... and corrosion inhibitors are not even 80% effective.
__________________
Zack Williams AKA Blue_fire
Team NexGen
The Rig: "NameLess"
Intel E4300
ASUS P5K Deluxe
2x1GB Corsair Dom
2x512Mb corsair XMS2
Visiontek Radeon HD 3850
Enermax Liberty 620W
Ultra Aluminus
OCZ Vendetta 2
|
11-26-2007
|
|
Lance Corporal
Level up: 16%, 32 Points needed |
|
|
Join Date: Sep 2007
Location: Saudi Arabia
Posts: 45
Rep Power: 0
|
|
|
Re: finaly finished my W/C
didnt know that, so what the next option :s ?
__________________
My Rig:
EVGA 680i T1 Revision With Koolance CHC-120 for NB & SB
Core2 Extreme QX6800 With Koolance CPU-330
EVGA 8800 Ultra in SLi With Koolance VID-282
Corsair Dominator PC-9136 C5D
2 WD Raptors 150GB in RAID 0
1 WD Caviar 500GB
2 Koolance EHX-1050BK Eternal Radiator
2 Koolance PMP-400 Pump
2 Swiftech Micro Reservoir
Ultra X3 1000watt PSU
3dmark06 score: 18085
Here is the link
|
11-27-2007
|
|
Gunnery Sergeant
Level up: 36%, 146 Points needed |
|
|
Join Date: Dec 2006
Location: Kellogg
Age: 19
Posts: 227
Rep Power: 2
|
|
|
Re: finaly finished my W/C
ok, if the issue is not flat-ness, then it has to be somthing else. Have we ruled out the pressure factor? is your loop configured: res>pump>cpu>rad? Maybe you are still using to much thermal paste? pull your block off, take pics of the contact its making
__________________
Zack Williams AKA Blue_fire
Team NexGen
The Rig: "NameLess"
Intel E4300
ASUS P5K Deluxe
2x1GB Corsair Dom
2x512Mb corsair XMS2
Visiontek Radeon HD 3850
Enermax Liberty 620W
Ultra Aluminus
OCZ Vendetta 2
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 08:06 AM.
|
|
